EN 10111 S420NL steel plate

EN S420NL Steel Plate Third Party Inspection:Over the past ten years, we have built solid business ship with most third party inspection organizations. The representatives are SGS, BV, Intertek, TUV, PMI, BV,LR, GL, RINA, ABS, CCS, NK, DNV, KR, etc.

  • Features

EN 10111 S420NL steel plate/sheet a hot rolled structural steels,which shall be done low temperature charpy_V impacting test under EN10025 standard,the temperature shall be minus 20 centi degree,and the impacting energy shall be min 27J.The yield strength of S420NL shall be above 420Mpa for the thickness belows 16 millimeter.

EN S420NL steel Chemical Composition
Grade: S420NL
C max:0.2
Si max:0.6
Mn max:1.0-1.7
P max:0.025
S max:0.02
N max:0.025
AL max:0.02
Nb max:0.05
V max:0.2
Ti max:0.05
Cr max:0.3
Ni max:0.8
Mo max:0.1
Cu max:0.55
CEV max:0.52

EN S420NL steel Mechanical Properties


Grade

Yield Strength 
(Min Mpa) Thickness(mm)

Tensile Strength
(Mpa)

Impacting Test

≤ 16

16-40

40-100

 ≥ 100

T<100

T>100

J

S420NL

420

400

390

340

520-680

500-650

-50

27

EN S420NL Steel Plate Third Party Inspection:
Over the past ten years, we have built solid business ship with most third party inspection organizations. The representatives are SGS, BV, Intertek, TUV, PMI, BV,LR, GL, RINA, ABS, CCS, NK, DNV, KR, etc.
EN S420NL Steel Plate Scope of Inspection:
Quality check, Packing and storage check, Marking check, Visual quality check, Dimension check, Document review, Quantity verification, Chemical composition analysis, Tensile test, Loading supervision, etc.
We arrange Third Party Inspection according to customer instruction. After inspection, the official test report will be published if test result approved.

We sincerely hope to establish long-term cooperation relations with you on the basis of mutual benefit, reciprocity and common development. So if you need any help, please be free to contact us,we will give you the best quote of EN S420NL steel plate.

Request a quotation

Contact E-Mail: sales7@bebonchina.com